Type to search


The Ultimate Guide To Washing And Caring For Your Printed T-Shirts


Washing And Caring For Your Printed T-Shirts

Washing printed t-shirts can be a little intimidating, but it doesn’t have to be. The key is knowing how to protect the print and garment while maintaining its structure. We’ve compiled some tips and tricks for how to best care for your printed t-shirt wardrobe.

Cleaning And Caring For Your Printed T-Shirts May Seem Like A No-Brainer, But There Are A Few Extra Tips To Keep In Mind

You don’t have to wash your t-shirt after every wear, but the longer you leave it between washes, the more likely it is that stains will set in. If you’re going to wear a shirt more than once before washing it, make sure it’s clean otherwise, you risk staining other clothes in your wardrobe.

You should also keep in mind that when it comes to drying t-shirts on high heat settings (or even medium), this can cause shrinkage and fade over time. So, try not to put them through too many spin cycles. When possible, hang dry instead of using an electric dryer; this helps prevent damage caused by water spots or wrinkling due to rapid evaporation during the drying process.

When washing new printed tees:

  • Wash cold and hang dry. This will help prevent any colour loss due to heat exposure during washing/drying cycles. For the best results with machine washing – turn it inside out before putting it into the machine (to protect the logo from getting caught on other items).
  • Use a gentle detergent so there won’t be any residue left behind which could stain other fabrics later down the line if used improperly (I’ve learned this lesson first hand). 
  • Avoid using fabric softeners as well since most brands contain chemicals that may cause discolouration over time if left unattended long enough. After doing both steps above successfully – let air dry naturally rather than placing directly into the dryer where heat could damage certain types of ink quality found only available under special circumstances such as discharge printing methodologies used today.

Washing Printed T-Shirts Too Soon Can Ruin Them

It’s tempting to wash your new t-shirt as soon as you get it. After all, who wants to walk around in a dirty t-shirt for a day or two? But if you’re going to wear that design on the front of your shirt, washing it too soon can ruin the print.

The best way to care for printed tees is by following these simple rules:

  • Don’t wash them for at least 24 hours after receiving them in the mail (or when buying from an online retailer).
  • Don’t use hot water when washing them, this will remove some of the ink and ruin any designs printed on top of other colours (like white text over black). However, you can get high-quality t shirts at Proper Printed and minimize the risk of having the printed designs removed.
  • Avoid bleaching agents like chlorine bleach or oxi-detergents (found in some detergents) because they will fade out some colours more quickly than others. Don’t use fabric softeners either, since these coatings can make cotton fibres sticky which leads us back to problem number one – sticking together.

How To Get The Grit Out Of Your T-Shirt

Okay, this is the tough part. You’ve got a bunch of T-shirts that are dirty and need to be washed. The first step is to take them out of their packaging, which can be done in different ways.

If your T-shirt came from a store, simply remove it from its plastic bag and put it in your washing machine. If you bought online, however, things might get more complicated because some companies ship shirts in plastic wrapping instead of bags, so you’ll have to open those little plastic tabs with scissors or something else sharp before putting your shirt in the wash.

Use Stainless Steel Pegs To Dry Your T-Shirts

If you’re looking for a way to dry your t-shirts without them getting stretched out, stainless steel pegs are the way to go. Popular brand EcoPegs.com.au – stainless steel clothes pegs will protect your t shirt garment by allowing air to flow freely around the garments, helping them dry faster and preventing them from becoming distorted in shape.

Stainless steel pegs are also very easy to wash, unlike plastic ones which can become discoloured if left wet too long or exposed to direct sunlight over time. The best thing about using stainless steel pegs is that they don’t require any maintenance at all. 

You Don’t Have To Waste Water By Washing It By Hand

If you’re the kind of person who loves to wash their clothes by hand, then go right ahead and do so. But if you’re looking for a more efficient way to care for your printed t-shirts, using a mesh laundry bag is a great option.

It’s also important not to use the washing machine if it isn’t necessary – unless you have delicate items that need special treatment or are worried about shrinking or wrinkling (which is unlikely), there’s no reason why hand-washing couldn’t work just as well. And even though tumble dryers may seem like an easy way out at first glance, they actually cause more damage than good over time, they’ll shrink and fade your clothes faster than hanging them up outside in direct sunlight would ever do on its own.

Your Washing Machine Is Gentler Than You Think

You should also wash your shirts in cold water. You may be tempted to use hot water because it will get your T-shirt clean faster, but this can cause the fabric of the shirt to shrink and become misshapen. The same goes for washing machines, if you have a top loader, use it. Front loaders are gentler on garments than their older counterparts.

If you’re worried about losing one of your favourite tees in a pile of laundry or getting caught on something else in the wash cycle, place each one inside a mesh laundry bag before tossing them into the machine. This will keep them from getting lost in the shuffle (or being mistaken as dirty).

To Get The Best Clean, You Should Use Detergent And Fabric Softener – But Measure Carefully

It’s important to remember that you should only use a tablespoon of detergent and not more. Too much can make your t-shirt sticky and ruin the print.

You should also use fabric softener if you have any – but don’t overdo it. Too little fabric softener will leave your shirt feeling rough. Using too much fabric softener can also leave your clothes feeling sticky. You should only use one tablespoon per load of laundry, and not more than two tablespoons if you have a large load.

Turning Your T-Shirt Inside Out Will Extend Its Life

When you turn your t-shirt inside out, it will extend the life of your printed t-shirt. This is because the seams are stitched in a different direction. In addition to reducing friction, this also helps to reduce wear and tear on the print.

Leave a Comment

Your email address will not be published. Required fields are marked *