When closing a door, people don’t always give it enough attention and end up slamming it shut. Even if you’re trying to be gentle with the door, it can still slam shut due to various factors. In this article, you will learn how to stop a swinging door from slamming shut without any prep time and no special tools required. Cooperative doors are usually found in hotels, schools, or places that require certain standards of etiquette and code of conduct. These types of doors have hinges that connect both sides of the door at the top and bottom so that they open only in one direction. Keep reading for more information about cooperative doors and advice on how to stop a swinging door from slamming shut.

How To Stop A Door From Slamming

Use a rubber wedge

A rubber wedge can be used to reduce the force of the door as it closes. This will help prevent a swinging door from slamming shut because it will close more slowly and gently. A rubber wedge can be purchased at most hardware stores or home improvement centers. They are very easy to install, just place one end of the rubber wedge in the bottom corner of the door and let it sit there until it’s secure. The rubber wedge will reduce the speed of your closing doors, but not completely stop them from slamming shut. The best way to avoid a slamming door is to close it slowly and with care by using both hands while pulling on it gently.

Use a magnetic closer

Another way to stop a swinging door from slamming is by using a magnetic closer. Magnetic closers are great for interior doors because they don’t require any drilling or holes in your walls to install them properly, which makes them ideal for rental properties where holes in walls might cause damage or even violate rental agreements if they aren’t repaired before moving out time arrives. Magnetic closers work by attaching them onto your interior doors using adhesive strips that come with each unit and then attaching another strip onto your wall near where you will be installing the magnetic closer unit itself. Once installed properly, you should feel some resistance when you reach forward to pull open your interior swinging door, but not enough that you need to use additional strength or effort when opening or closing the door.

Use a doorstop

A doorstop can help stop a swinging door from slamming shut. A doorstop is usually made of metal and has a rubber or plastic tip on the end that prevents the door from slamming into walls or other objects as it closes. Doorstops can be purchased at most hardware stores and home improvement centers, but they are also easy to make at home with some basic materials if you are an experienced do-it-yourselfer. To create a homemade doorstop, simply take an old piece of wood, metal, or plastic and drill a hole in one end that is slightly smaller than the diameter of your door’s hinge pin so that it will fit securely over the pin when in place. Next, drill holes all along the bottom edge of your homemade doorstop so that you can screw it to a wall near where you will be installing your new magnetic closer unit on your interior swinging doors. When you install these two items together properly, you should have no problem stopping any swinging doors from slamming shut in your home while still allowing them to open and close easily when needed without much effort required on your part.

Use a door stabilizer

A door stabilizer is another useful tool that can help keep your interior swinging doors from slamming shut in your home. Doorstabilizers are attached to the bottom of interior doors and are designed to prevent the door from slamming shut by using either springs or a counterweight system to help hold the door open in place once it has been opened to a certain degree. Some types of door stabilizers even come with adjustable settings so that you can change how much force they use as well as how far open they will let a swinging door open before stopping it from proceeding any further. In addition, many models of door stabilizers also work with both wood and metal doors, which makes them ideal for use in rental properties where both types of doors are common.

Use a door wedge

A door wedge is another useful tool that can help keep your interior swinging doors from slamming shut in your home. Doorstabilizers are attached to the bottom of interior doors and are designed to prevent the door from slamming shut by using either springs or a counterweight system to help hold the door open in place once it has been opened to a certain degree. Some types of door stabilizers even come with adjustable settings so that you can change how much force they use as well as how far open they will let a swinging door open before stopping it from proceeding any further. In addition, many models of door stabilizers also work with both wood and metal doors, which makes them ideal for use in rental properties where both types of doors are common.

What Causes A Door To Slam Shut?

A loose hinge

A loose hinge is one of the most common reasons that a door will slam shut. A door that is not properly hung on its hinge can easily slam shut without warning. This can happen when the door’s weight causes it to lurch forward and hit against the frame before swinging back again. When this happens, it causes the door to slam shut with great force.

An improperly installed closer unit

Another common reason that a door will slam shut is due to an improperly installed closer unit. If your interior doors have closer units, they should be installed at a proper height and angle so that they do not rub against any other part of the frame when being opened or closed. However, some people will attempt to install them at a lower level than recommended in order to save on costs or time spent installing them, which can lead to problems down the road if they start rubbing against other parts of your doors instead of closing normally. This can cause your interior doors to begin slamming shut rather than closing smoothly, which can be quite damaging over time if this problem goes unchecked for long periods of time without being repaired by an experienced professional with experience in installing these types of products properly in homes and businesses across America.

Exterior doors slamming into each other during high winds

Another common reason for your exterior doors slamming into each other during high winds is due to improper installation techniques used by inexperienced contractors who are trying their best but simply lack the experience to install them properly. When these doors are properly installed, they should be hung onto the frame at a height that is equal to or slightly higher than the height of the frame itself. If they are not, high winds can easily cause them to slam shut due to their inability to withstand the force of the wind.

Improper door installation in your home

When your doors are improperly installed, they can also cause slamming issues on their own. This can happen when a door’s handles or hinges are installed at an angle that is too low for them to operate properly and without causing any damage to other parts of your home’s structure or exterior walls when being opened and closed. If this happens, you may have excessive slamming issues with some of your doors in your home over time as one door will slam shut instead of closing smoothly with its neighbors in order to ensure that it closes all the way and stays closed while everyone else remains safe inside their homes due to a lack of proper installation techniques being used by contractors who lack proper experience installing interior doors in America today.

Final Words

The only effective way to stop a door from slamming shut is by reducing the friction between the two surfaces. You can do this by applying a lubricant to the frame. You can also try re-positioning the door so that the air is redirected along one of the sides or top of the door. If nothing works and you really want to prevent the door from slamming shut, you might have to replace the frame with a new one that has the proper dimensions. You can also try to install a cooperative door, which will keep the door from slamming shut. However, these are pretty expensive and might not be worth the investment if you’re only dealing with a few instances of slamming doors. You can also try to re-position the door so that the air is redirected along one of the sides or top of the door.